A while ago (2019 according to the repo), I was learning about the Internet of Things (IoT) and went through the process to prototype a smart indicator light. I made it communicate with AWS IoT where I could both change the color of the light on the device (and it would report to the cloud) as well as change the color in the cloud (and have the indicator light change).
Separately, I’ve also been spending more time on home automation. I have Home Assistant setup in my house and had been reading on ESPHome but haven’t come up with a good test project–so I decided to repurpose my indicator light to work with ESPHome!
I wanted to see whether I could use the original hardware without modifications–mostly because instead of recreating the board, I just dusted it off…
As the name may imply, ESPHome must be used by hardware supporting the ESP32 or ESP8266 (or RP2040, but that’s for another time) chipset. I originally made this prototype on a Raspberry Pi but wanted to use a smaller form factor for portability and yet retain the ability to connect using Wi-Fi. I’ve been using the Adafruit Feather HUZZAH on a few projects, and had back then, so I stuck with it.
Removing the Software
This project has been through a few iterations of software. I first started with python on the Raspberry Pi [code]. This would use the GPIO to control each leg of the RGB LED and would communicate with an IoT shadow in the cloud for the status. This meant AWS IoT was my interfacing layer and I could build a web-based GUI, Alexa skill, or mobile app to control this light.
ESPHome has a different approach–you declare which components to use and provide the configuration for those components, then ESPHome compiles the modules and configuration together and produces an artifact that can be loaded onto the device. Anyone familiar with kubernetes will recognize this pattern: declare your intent in a resource file and let kubernetes build it. With ESPHome, I declare the light and which pins to use for output, and it builds the rest of it for me.
This is the configuration section for the LED in ESPHome:
- platform: rgb
- id: led_red
- id: led_green
- id: led_blue
While this appears simple enough, I still did have to spend time learning the different values, but was able to piece it together by looking at the examples on ESPHome’s website.
There’s an added benefit of “no code” solutions like ESPHome like the included features regarding Wi-Fi, Over The Air updates (OTA) and API integration. For every programming language, adding these features meant extra lines of code and setup, but ESPHome packages them as part of the configuration and build process. Much of the code in the earlier revisions was dedicated to Wi-Fi and API connectivity, with only a small section actually controlling the physical hardware. I added OTA when moving to ESPHome, and wrote less lines as a result of the switch!
Migrating from AWS IoT to Home Assistant
While I was able to build interfaces that worked with IoT and the cloud, I wanted something that was already interconnected and didn’t require me to build the integrations. I also prefer for control traffic to be kept as local as possible. While the cloud rarely goes offline, my internet connection is much more susceptible to outages which would render the light inoperable. With a local brain, I can save on both.
Like this project, I’ve built Home Assistant a few times over the years and have been slowly expanding it to incorporate the features I need. I have the Home Assistant Podcast on my feed and it seems like everyone kept mentioning ESPHome and how it integrates with Home Assistant. Plus, ESPHome is easily run as an addon for Home Assistant. However, the best part is the interfacing is done for me! When I create the light in ESPHome, the device and entity show up in Home Assistant and include the interfacing.
Because I’ve integrated Home Assistant with Alexa, I also automatically get an Alexa interface through the Alexa app as well as voice control!
Okay, now what?
What’s the point of a RGB light that’s “smart-controlled”? The device isn’t practical–but it’s one of the first small board projects I built and have spent a lot of time with. I’d already completed this project, but was able to repurpose it and find out something new. So the point–is discovery.
The project itself is a learning tool–now that I’ve made this work, I’ve also been able to add smart controls to a LEGO set with lights. Now as I’m automating my house, if I need a random motion sensor that communicates with MQTT then I can build it and integrate it quickly!
ESPHome also makes home automation more available to everyone. I speak more programming languages than languages–but not everyone does. Writing a config file is much easier than writing code and it cuts down on development time. Less time on software means that I also get more time on hardware!